Learn how to install, configure and manage your Mercku M6 Mesh Wi-Fi system.
The Mercku M6 is a Wi-Fi 6 Mesh Router designed to provide reliable whole-home coverage for apartments, townhouses and multi-level homes.
AX1800 dual-band Wi-Fi 6 with OFDMA and MU-MIMO technology for faster speed and lower latency.
Expand your coverage by adding additional M6 nodes with seamless roaming.
Manage your network through Web UI, Mobile App, NOC and TR-069.
Connect the supplied power adapter and Ethernet cable. The LED turns red when powered on and turns white after Internet connection is established.
Use your phone or computer to connect to the default Wi-Fi network: MERCKU-XXXX.
The SSID can be found on the label at the bottom of the device.
Open mywifi.mercku.tech, or scan the QR code to download the Mercku App.
Blinking: firmware upgrade or router reboot.
Fast blinking: restoring factory settings.
Blinking: Mesh pairing mode.
Solid white: stable network connection.
Blinking white: poor mesh/network connection.
Solid orange: no Internet connection.
Hold for 5 seconds or more to restore factory settings.
One-touch Mesh pairing button.
Gigabit Ethernet port for Internet connection.
Two Gigabit Ethernet ports for local devices.
DC 12V / 1.5A power input.
Additional M6 devices can be added as Mesh nodes to extend Wi-Fi coverage.
1. Power on the new node.
2. Press CONNECT button.
3. Press CONNECT button on the main router.
4. The LED turns white when pairing succeeds.
M6 supports wired and wireless backhaul. Use Ethernet cable between nodes for wired Mesh connection.
Press and hold the RESET button for more than 5 seconds.
After reset, all previous configurations and Mesh connections will be removed.
Firmware can be upgraded through Web UI.
Online upgrade
Offline firmware upload
Automatic upgrade
Wi-Fi 6 AX1800 Dual Band
2.4GHz: 573 Mbps
5GHz: 1201 Mbps
CPU: Qualcomm Quad ARM Cortex A53 1.2GHz
Memory: 512MB DDR3 RAM + 1Gb NAND Flash
1× WAN + 2× LAN Gigabit
DC 12V / 1.5A