Learn about the physical buttons, Ethernet ports, LED indicators and hardware interfaces on your Mercku M6a router.
Use the diagram below to identify the main buttons and ports on the router.
Factory reset button.
Mesh pairing / WPS button.
Wired Ethernet connection.
Internet / modem connection.
DC power input.
The table below provides a quick reference for the physical interfaces on the router.
| Interface | Quantity | Description |
|---|---|---|
| RESET | ×1 | Factory reset button |
| CONNECT | ×1 | Mesh pairing / WPS button |
| LAN | ×2 | Ethernet LAN ports |
| WAN | ×1 | Ethernet WAN port |
| POWER | ×1 | DC power input |
The LED indicator provides information about the router’s current operating status.
Startup, restart, firmware upgrade or factory reset status.
Mesh pairing mode.
Network connected.
No Internet connection.
Use the WAN and LAN ports for wired Internet and local network connections.
Ethernet WAN port
Ethernet LAN ports
A factory reset removes your customized settings. You will need to configure the router again after the reset.
Interface layout and behavior may vary by hardware revision.
Follow these steps to complete the initial setup of your Mercku router.
Connect the router to power and connect the WAN port to your modem or Internet source.
Connect your phone or computer to the Mercku Wi-Fi network.
Open the Mercku App or router Web interface and follow the setup instructions.
Setup steps may vary slightly depending on the product model and software version.
Add additional Mercku devices to extend Wi-Fi coverage throughout your home.
Complete the initial setup of the main router.
Power on the additional Mesh node and place it near the main router during pairing.
Use the CONNECT button or Mercku App to start the Mesh pairing process.
Wait for the LED indicator to confirm that Mesh pairing has completed.
After pairing, place the Mesh node in a location where it can still maintain a strong connection to the main router.
Restore the router to its factory default settings.
Factory reset removes customized network settings, including Wi-Fi settings and router configuration.
Keep the router powered on.
Press and hold the RESET button.
Release the button and wait for the router to restart.
Complete the initial setup again after the reset.
Manage your wireless network name, password and other Wi-Fi settings.
The Wi-Fi network name displayed when nearby devices search for wireless networks.
The password used by phones, computers and other devices to connect to Wi-Fi.
Open the Mercku App or router Web interface.
Open Wi-Fi Settings.
Change the Wi-Fi name or password and save the new settings.
Connected wireless devices may need to reconnect after the Wi-Fi name or password is changed.