Learn about Mercku router buttons, ports, LED indicators and hardware interfaces.
Mercku routers use physical buttons for Mesh pairing, WPS connection and factory reset.
Short press (1 second):
Start Mesh pairing.
Long press (≥5 seconds):
Activate WPS connection.
Press and hold for more than 5 seconds to restore factory settings.
Port configurations vary by model.
| Model | Interface |
|---|---|
| M6a / M6a Plus |
WAN ×1
LAN ×2 POWER ×1 |
| M6c |
WAN ×1
LAN ×3 POWER ×1 |
| M6s |
2.5G WAN ×1
Gigabit LAN ×4 POWER ×1 |
| M6s PoE |
Gigabit LAN ×4
2.5G WAN/LAN PoE |
| M6 Series Router |
Gigabit WAN ×1
Gigabit LAN ×2 POWER ×1 |
| M2 Series |
Gigabit WAN ×1
Gigabit LAN ×1 USB 2.0 POWER |
The LED indicator shows the current operating and network status of the router.
| Color | Meaning |
|---|---|
| ? Red | Device interaction, firmware upgrade, restart or factory reset. |
| ? Blue | Mesh pairing mode. |
| ⚪ White | Network connected. Blinking indicates weak Mesh connection. |
| ? Orange | No Internet connection. |
| ? Green | Firmware recovery mode. |
View physical buttons, Ethernet ports and hardware interfaces by product model.