Configure supported VPN client connections and learn which VPN options are available on your Mercku router.
Mercku routers provide VPN client functionality and VPN passthrough support on supported models and firmware versions.
Connect the router to a supported remote VPN service or network.
Mercku product documentation lists PPTP, L2TP and OpenVPN on supported models.
Newer M6s documentation also lists WireGuard VPN support on applicable models and firmware.
Available VPN protocols can vary by Mercku model and firmware version. Check the options shown on your router before configuring a VPN profile.
VPN controls are available from Router Web on supported software versions.
Go to:
Advanced Settings → VPN
If the VPN page or a specific protocol is not shown, it may not be available on your current model or firmware version.
The VPN protocols available to you depend on the product and firmware.
Supported by Mercku VPN Client documentation for applicable models.
Supported by Mercku VPN Client documentation for applicable models.
Supported by Mercku VPN Client documentation for applicable models and can use a VPN configuration file.
Listed in newer M6s product documentation. Availability depends on model and firmware.
Allows supported VPN traffic from client devices on the local network to pass through the router.
The router can report VPN states such as connecting, connected, disconnecting and disconnected.
The exact fields shown depend on the VPN protocol you select.
A VPN profile includes a name and the selected VPN protocol.
PPTP and L2TP configurations can use a VPN server address together with the required username and password.
OpenVPN configuration can use an imported configuration file, depending on the Router Web implementation available on your firmware.
Supported software can show whether the VPN is connecting, connected, disconnecting or disconnected, together with available connection information or error details.
WireGuard support is model- and firmware-dependent. Follow the WireGuard options provided by your specific Mercku software version.
PPTP, L2TP and OpenVPN are listed for supported Mercku models. Newer M6s documentation also lists WireGuard. The actual options depend on your model and firmware.
On supported firmware, go to Advanced Settings → VPN in Router Web.
VPN Passthrough allows supported VPN connections created by devices on your local network to pass through the router.
WireGuard availability depends on the router model and firmware version. It is listed in newer M6s documentation but is not documented for every Mercku model.
Confirm the selected protocol, server information and credentials, then check the connection status or error message shown by the router. Also confirm that your model and firmware support the selected VPN protocol.